Fujitsu PRIMERGY BX900 - Denial of Service (Dos) Commands

© 2011 Fujitsu Technology Solutions
729
10.16.8 Denial of Service (DoS) Commands
10.16.8.1 show dos-control
This command displays Denial of Service configuration information.
Syntax
show dos-control
Default Setting
None
Command Mode
Privileged Exec
Display Message
SIPDIP Mode: May be enabled or disabled. The factory default is disabled.
First Fragment Mode: May be enabled or disabled. The factory default is disabled.
Min TCP Hdr Size: The range is 0 - 255. The factory default is 20.
TCP Fragment Mode: May be enabled or disabled. The factory default is disabled.
TCP Flag Mode: May be enabled or disabled. The factory default is disabled.
L4 Port Mode: May be enabled or disabled. The factory default is disabled.
ICMP Mode: May be enabled or disabled. The factory default is disabled.
Max ICMPv4 Pkt Size: The range is 0-1023. The factory default is 512.
Max ICMPv6 Pkt Size: The range is 0-1023. The factory default is 512.