© 2011 Fujitsu Technology Solutions
164
9.2.13 DHCP Client
9.2.13.1 DHCP Client-Identifier
Specify the DCHP client identifier for the switch. The DCHP client identifier is used to include a client
identifier in all communications with the DHCP server. The identifier type depends on the requirements
of your DHCP server.
i
The DHCP client identifier will be changed immediately on the configuration if the hostname
is changed. A renew operation (reboot or "oob protocol none and oob protocol dhcp") is
required to activate the new DHCP client identifier.
Figure : DHCP Client-Identifier
Selection Criteria
DHCP Identifier - Specifies the type of DHCP Identifier.
• Default
• Specific Text String
• Specific Hexadecimal Value
Non-Configurable Data
Current DHCP Identifier (Hex/Text) - Show the current setting of DHCP identifier.
Configurable Data
Text String - A text string.
Hex Value - The hexadecimal value.
Command Buttons
Apply - Send the updated screen to the switch perform the setting DHCP client identifier.
To Next Page
Loading...
