Fujitsu PRIMERGY BX900 - Script Management Commands; Script Apply; Script Delete

© 2011 Fujitsu Technology Solutions
610
10.8 Script Management Commands
10.8.1 script apply
This command applies the commands in the configuration script to the switch. The apply command backs
up the running configuration and then starts applying the commands in the script file. Application of the
commands stops at the first failure of a command.
Syntax
script apply <scriptname>
<scriptname> - The name of the script to be applied.
Default Setting
None
Command Mode
Privileged Exec
10.8.2 script delete
This command deletes a specified script or all the scripts presented in the switch.
Syntax
script delete {<scriptname> | all}
<scriptname> - The name of the script to be deleted.
all - Delete all scripts presented in the switch
Default Setting
None
Command Mode
Privileged Exec