Fujitsu PRIMERGY BX900 - MLD Snooping

© 2011 Fujitsu Technology Solutions
226
9.3.13 MLD Snooping
9.3.13.1 Config and Status
Use this menu to configure the parameters for MLD Snooping, which is used to build forwarding lists for
multicast traffic. Note that only a user with Read/Write access privileges may change the data on this
screen.
Figure : MLD Snooping Config and Status
Selection Criteria
Admin Mode - Select the administrative mode for MLD Snooping for the switch from the pull down
menu. The default is disable.
Non-Configurable Data
Multicast Control Frame Count - The number of multicast control frames that are processed by the
CPU.
Interfaces Enabled for MLD Snooping - A list of all the interfaces currently enabled for MLD
Snooping.
Data Frames Forwarded by the CPU - The number of data frames forwarded by the CPU.
VLAN Ids Enabled For MLD Snooping - Displays VLAN Ids enabled for MLD snooping.
Command Buttons