Fujitsu PRIMERGY BX900 - Dynamic DNS Client Commands

© 2011 Fujitsu Technology Solutions
562
10.6.13 Dynamic DNS Client Commands
10.6.13.1 ddns client
This command is DDNS (Dynamic DNS) updating that notify ddns provider update the domain record. If
update success, save there parameter in ddns list.
The Dynamic DNS is a method, protocol, or network service that provides the capability for a networked
device using the Internet Protocol Suite, such as an IP router or computer system, to notify a domain name
server to change, in real time the active DNS configuration of its configured hostnames, addresses or
other information stored in DNS.
Syntax
ddns { dhs | dyndns | dyns | easydns | ods | tzo | zoneedit } <username> <password> <host>
[<address>]
no ddns { dhs | dyndns | dyns | easydns | ods | tzo | zoneedit } <username> <password> <host>
[<address>]
<no> - This command remove a ddns config from list.
Default Setting
None.
Command Mode
Global Config