© 2011 Fujitsu Technology Solutions
39
2.3 Features and Benefits
2.3.1 Connectivity
• 36 internal Gigabit ports for easy network integration of your server cards (SB6: 18 ports).
• 8 external 1000BASE-T Gigabit ports for uplinking to the corporate network (SB6: 6 ports).
• 4 SFP Gigabit ports for uplinking to the corporate network. (SB11a)
• 2 SFP+ 10Gigabit ports for uplinking to the corporate network. (SB11)
• Support for auto MDI/MDI-X on external ports allows any connections to be made with
straight-through cable (with auto-negotiation enabled).
• Auto-negotiation enables each port to automatically select the optimum speed (10,100 or 1000Mbps)
and communication mode (half or full duplex) if this feature is supported by attached device;
otherwise the port can be configured manually.
• IEEE 802.3ad Gigabit Ethernet compliance ensures compatibility with standards-based network
cards and switch from vendor.
2.3.2 Performance
• Transparent bridging
• Forwarding modes: Store-and-forward
• Bandwidth: 152Gbps (SB11) / 96Gbps (SB11a) / 48 Gbps (SB6)
• Switching latency: average 8 us for 64-byte frames
• Switching Table with 8K (SB11a, SB6) / 16K (SB11) MAC address entries
• Mean Time Between Failure (MTBF): 175699 hours
To Next Page
Loading...
