Fujitsu PRIMERGY BX900 - Static MAC Filtering Commands; Show Commands

© 2011 Fujitsu Technology Solutions
494
10.5 Static MAC Filtering Commands
10.5.1 Show Commands
10.5.1.1 show mac-addr-table static
This command displays the Static MAC Filtering information for all Static MAC Filters. Use <all>, all the
Static MAC Filters in the system will be displayed. If you supply a value for <macaddr>, you must also
enter a value for <vlanid>, and the system displays Static MAC Filter information only for that MAC
address and VLAN.
Syntax
show mac-addr-table static {<macaddr> <1-4094> | all}
<macaddr> - Static MAC address.
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC Address: The MAC address of the filter in the format 00:01:1A:B2:53:4D.
VLAN ID: The VLAN ID associated with the filter.
Source Port(s): A list of ports to be used for filtering inbound packets.