Fujitsu PRIMERGY BX900 - Page 495

© 2011 Fujitsu Technology Solutions
493
Default Setting
None
Command Mode
Global Config
This command removes all configured probe ports and mirrored port.
Syntax
no port-monitor
Default Setting
None
Command Mode
Global Config
10.4.14.3 port-monitor session mode
This command configures the administration mode of port-monitoring function for a monitor session.
Syntax
port-monitor session <session-id> mode
no port-monitor session <session-id> mode
<session-id> - Session ID.
no - This command disables port-monitoring function for a monitor session.