Fujitsu PRIMERGY BX900 - Port Backup Commands; Show Commands

© 2011 Fujitsu Technology Solutions
684
10.14 Port Backup Commands
10.14.1 Show Commands
This command displays the port-backup information
Syntax
show port-backup
Default Setting
None
Command Mode
Privileged Exec
Display Message
Admin Mode: Indicates whether or not port-backup is active on the switch.
Group: A Group ID was displayed the numbers of the Group ID.
Mode: For the admin mode to disable or enable or not.
MAC Update: Indicates whether or not mac-move-update is enable on the group.
Failback: This indicates that is failback time.
Active Port: Display the active port number.
Backup Port: Display the backup port number.
Current Active Port: Display the current active port number.