Fujitsu PRIMERGY BX900 - Page 730

© 2011 Fujitsu Technology Solutions
728
10.16.7.5 ldap racName
This command is used to configure racName.
Syntax
ldap racName <racName>
no ldap racName
<racName> - string.
no - This command is used to return the racName to the default.
Default Setting
None
Command Mode
Global Config
10.16.7.6 ldap racDomain
This command is used to configure racDomain.
Syntax
ldap racDomain <racDomain>
no ldap racDomain
<racDomain> - string.
no - This command is used to return the racDomain to the default.
Default Setting
None
Command Mode
Global Config