Fujitsu PRIMERGY BX900 - Page 729

© 2011 Fujitsu Technology Solutions
727
10.16.7.3 ldap port
This command is used to configure LDAP server port.
Syntax
ldap port <portid>
no ldap port
<portid> - 1-65535
no - This command is used to return the LDAP server port to the default value.
Default Setting
389
Command Mode
Global Config
10.16.7.4 ldap baseDN
This command is used to configure baseDN.
Syntax
ldap baseDN <baseDN>
no ldap baseDN
<baseDN> - string.
no - This command is used to return the baseDN to the default.
Default Setting
None
Command Mode
Global Config