Fujitsu PRIMERGY BX900 - Page 52

© 2011 Fujitsu Technology Solutions
50
3. Select (3) Console Redirection. The Console Redirection Table is displayed.
+-----------------------------------------------------------------------------+
| Console Redirection Table page_3
+-----------------------------------------------------------------------------+
(1) Console Redirect Connection Blade
(2) Set Return Hotkey , Ctrl+(a character) : Q
(3) Set Console Redirection Timeout : 900
Enter selection or type (0) to quit: 1
4. Select (1) Console Redirection Connection Blade. The Console Redirect Connection Blade is
displayed.
+-----------------------------------------------------------------------------+
| Console Redirect Connection Blade page_3_1
+-----------------------------------------------------------------------------+
(1) Console Redirect Connection Blade-1
(2) Console Redirect Connection Blade-2
Enter selection or type (0) to quit: 1
5. Select which Connection Blade you want to redirect. Then press enter to check if the console
redirection is successful.
Press <Ctrl+Q> Return Console Menu
(BX900-CB1)#