© 2011 Fujitsu Technology Solutions
787
10.19.2.2 queue ip-dscp-mapping
This command maps an IP precedence value to an internal traffic class for a device.
Syntax
queue ip-dscp-mapping <ipdscp> <queue-id>
no queue ip-dscp-mapping
<ipdscp> - The IP DSCP value in the range of 0 to 63 or an IP DSCP keyword (af11, af12, af13, af21,
af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef).
<queue-id> - The range of mapped traffic class is 0 to 7.
no - Reset to the default mapping of the IP DSCP and the mapped traffic class.
i
The range of mapped traffic class is 0 to 6 for the stackable connection blade.
Default Setting
None
Command Mode
Global Config.
To Next Page
Loading...
