Fujitsu PRIMERGY BX900 - Page 129

© 2011 Fujitsu Technology Solutions
127
Total Transmit Packets Discarded - The sum of single collision frames discarded, multiple collision
frames discarded, and excessive frames discarded.
Single Collision Frames - A count of the number of successfully transmitted frames on a particular
interface for which transmission is inhibited by exactly one collision.
Multiple Collision Frames - A count of the number of successfully transmitted frames on a
particular interface for which transmission is inhibited by more than one collision.
Excessive Collision Frames - A count of frames for which transmission on a particular interface
fails due to excessive collisions.
Packets Dropped by MMU - A count for the packets dropped by the MMU. There are reasons for
MMU to drop packets, such as CBP full, HOL blocking, etc.
GVRP PDUs Received - The count of GVRP PDUs received in the GARP layer.
GVRP PDUs Transmitted - The count of GVRP PDUs transmitted from the GARP layer.
GVRP Failed Registrations - The number of times attempted GVRP registrations could not be
completed.
GMRP PDUs Received - The count of GMRP PDUs received from the GARP layer.
GMRP PDUs Transmitted - The count of GMRP PDUs transmitted from the GARP layer.
GMRP Failed Registrations - The number of times attempted GMRP registrations could not be
completed.
STP BPDUs Received - Number of STP BPDUs received at the selected port.
STP BPDUs Transmitted - Number of STP BPDUs transmitted from the selected port.
RSTP BPDUs Received - Number of RSTP BPDUs received at the selected port.
RSTP BPDUs Transmitted - Number of RSTP BPDUs transmitted from the selected port.
MSTP BPDUs Received - Number of MSTP BPDUs received at the selected port.
MSTP BPDUs Transmitted - Number of MSTP BPDUs transmitted from the selected port.
Time Since Counters Last Cleared - The elapsed time, in days, hours, minutes, and seconds since
the statistics for this port were last cleared.
Command Buttons
Clear Counters - Clear all the counters, resetting all statistics for this port to default values.
Clear All Counters - Clear all the counters for all ports, resetting all statistics for all ports to default
values.
Refresh - Refresh the data on the screen with the present state of the data in the switch.