Fujitsu PRIMERGY BX900 - Page 161

© 2011 Fujitsu Technology Solutions
159
Chassis ID - Specifies the string value used to identify the chassis component associated with the
local system.
Port ID Subtype - Specifies the string describes the source of the port identifier.
Port ID - Specifies the string that describes the source of the port identifier.
System Name - Specifies the system name of the local system.
System Description - Specifies the description of the selected port associated with the local
system.
Port Description - Specifies the description of the selected port associated with the local system.
System Capabilities Supported - Specifies the system capabilities of the local system.
System Capabilities Enabled - Specifies the system capabilities of the local system which are
supported and enabled.
Management Address - Specifies the advertised management address of the local system.
Management Address Type - Specifies the type of the management address.
MAC/PHY Configuration/Status
• Auto-Negotiation - Specifies whether the auto-negotiation is supported and whether the
auto-negotiation is enabled.
• PMD Auto-Negoration Advertised Capabilities - Specifies the auto-negotiation and speed
capabilities of the PMD.
• Operational MAU Type - Specifies the current duplex and speed settings of the sending
system.
Power Via MDI
• MDI Power Support - Specifies the MDI power support capabilities of the sending IEEE
802.3 LAN station.
• PSE Power Pair - Specifies which pair is powered.
• Power Class - Specifies the required power level required.
Link Aggregation Status - Specifies the capability and current aggregation status of the link.
Link Aggregation Port Id - Specifies the aggregated port identifier.
Maximum Frame Size - Specifies the maximum supported IEEE 802.3 frame size.
Port VLAN Identity - Specifies the VLAN ID of the port.
Protocol VLAN - Specifies the Protocol VLAN ID and status.
VLAN Name - Specifies the VLAN name.
Protocol Identity - Specifies the particular protocols that are accessible through the port.
Command Buttons
Refresh - Updates the information on the page.