© 2011 Fujitsu Technology Solutions
316
whose IP address is 192.168.1.0 through 192.168.1.255 (inclusive) will be allowed access. To allow
access from only one station, use a Client IP Mask value of 255.255.255.255, and use that
machine's IP address for Client IP Address.
Prefix/Prefix Length - The combination of IPv6 Prefix and IPv6 Prefix length denote a range of IP
Addresses from which clients may access this device.
Command Buttons
Apply - Send the updated screen to the switch. Changes take effect on the switch but these
changes will not be retained across a power cycle unless a save is performed.
Delete - Delete the currently selected IP Filter Name. If you want the switch to retain the new values
across a power cycle, you must perform a save.
To Next Page
Loading...
