© 2011 Fujitsu Technology Solutions
327
Values - Displays the values of the configured match criteria.
Command Buttons
Apply - Send the updated screen to the switch and cause the changes to take effect on the switch
but these changes will not be retained across a power cycle unless a save is performed.
Cancel - Cancel the currently selected filter.
Delete - Delete the currently selected filter.
Rename - Allows to rename a specified class.
Add Match Criteria - Only one match criterion can be specified each time this button is invoked.
Based on the selected match criterion, an individual match criterion screen is provided to configure
its value.
i
Match criteria cannot be deleted from a class. The class must be deleted in order to remove
the match criteria.
Remove Class Reference - This button appears on the screen only if a specified class references
another class. The current class reference, of the specified class, is removed by invoking this button.
To Next Page
Loading...
