Fujitsu PRIMERGY BX900 - Page 398

© 2011 Fujitsu Technology Solutions
396
10.4.3.10 vlan name
This command changes the name of a VLAN. The name is an alphanumeric string of up to 32
characters, and the ID is a valid VLAN identification number. ID range is 1- 4094.
Syntax
vlan name <vlanid> <newname>
no vlan name <vlanid>
<vlanid> - VLAN ID (Range: 1 - 4094).
<newname> - Configure a new VLAN Name (up to 32 alphanumeric characters).
no - This command sets the name of a VLAN to a default setting string. The VLAN ID is a valid VLAN
identification number. ID range is 1 - 4094.
i
The range of VLAN ID is 1 to 4093 for the stackable connection blade.
Default Setting
The name for VLAN ID 1 is always “Default” string. The default name for other VLANs is a
VLAN0002 ~ VLAN4094 string.
Command Mode
VLAN database