© 2011 Fujitsu Technology Solutions
581
10.6.17.4 show lldp remote-device
This command uses to display summary information about remote devices that transmit current LLDP data
to the system. You can show information about LLDP remote data received on all ports or on a specific
port.
Syntax
show lldp remote-device {<slot/port> | all}
<slot/port> - Displays a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Local Interface: Identifies the interface that received the LLDP frame from the remote device.
Chassis ID: Shows the ID of the remote device.
Port ID: Shows the port number that transmitted the LLDP frame.
System Name: Shows the system name of the remote device.
To Next Page
Loading...
