Fujitsu PRIMERGY BX900 - Page 699

© 2011 Fujitsu Technology Solutions
697
10.16.1.3 show authorization users
This command displays information about the users assigned to the specified authorization login list. If the
login is assigned to non-configured users, the user “default” will appear in the user column.
Syntax
show authorization users <listname>
<listname> - the authorization login listname.
Default Setting
None
Command Mode
Privileged Exec
Display Message
User Name: This field displays the user assigned to the specified authorization login list.
Component: This field displays the component (User or 802.1x) for which the authorization login list is
assigned.
10.16.1.4 show dot1x
This command is used to show the status of the dot1x Administrative mode.
Syntax
show dot1x
Default Setting
None
Command Mode
Privileged Exec
Display Message
Administrative mode: Indicates whether authentication control on the switch is enabled or disabled.