Fujitsu PRIMERGY BX900 - Page 702

© 2011 Fujitsu Technology Solutions
700
10.16.1.7 show dot1x summary
This command is used to show a summary of the global dot1x configuration and summary information of
the dot1x configuration for a specified port or all ports.
Syntax
show dot1x summary {<slot/port> | all}
<slot/port> - is the desired interface number.
all - All interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: The interface whose configuration is displayed.
Control Mode: The configured control mode for this port. Possible values are force-unauthorized /
force-authorized / auto.
Operating Control Mode: The control mode under which this port is operating. Possible values are
authorized / unauthorized.
Reauthentication Enabled: Indicates whether re-authentication is enabled on this port.
Port Status: Indicates if the key is transmitted to the supplicant for the specified port.
10.16.1.8 show dot1x users
This command displays 802.1x port security user information for locally configured users.
Syntax
show dot1x users <slot/port>
<slot/port> - is the desired interface number.
Default Setting
None
Command Mode
Privileged Exec
Display Message
User: Users configured locally to have access to the specified port.