Fujitsu PRIMERGY BX900 - Page 743

© 2011 Fujitsu Technology Solutions
741
10.17.2.6 no match class-map
This command removes from the specified class definition the set of match conditions defined for another
class.
Syntax
no match class-map <refclassname>
<refclassname> is the name of an existing DiffServ class whose match conditions
are being referenced by the specified class definition.
Note: There is no [not] option for this match command.
Default
None
Command Mode
Class-Map Config
10.17.2.7 match dstip
This command adds to the specified class definition a match condition based on the destination IP address
of a packet.
Syntax
match dstip <ipaddr> <ipmask>
<ipaddr> specifies an IP address.
<ipmask> specifies an IP address bit mask; note that although similar to a standard subnet mask,
this bit mask need not be contiguous.
Default
None
Command Mode
Class-Map Config