Fujitsu PRIMERGY BX900 - Page 754

© 2011 Fujitsu Technology Solutions
752
10.17.3.1 assign-queue
This command modifies the queue id to which the associated traffic stream is assigned. The queueid is an
integer from 0 to n-1, where n is the number of egress queues supported by the device.
Syntax
assign-queue <0-7>
<0-7> - Queue ID.
(*)<0-6> - Queue ID.
Note: (*) is the stacking command.
Command Mode
Policy-Class-Map Config
Incompatibilities
Drop