Fujitsu PRIMERGY BX900 - Page 792

© 2011 Fujitsu Technology Solutions
790
10.19.2.5 queue cos-queue strict
This command activates the strict priority scheduler mode for each specified queue on a "per-port" basis.
Syntax
queue cos-queue strict <queue-id-0> [<queue-id-1> … <queue-id-7>]
no queue cos-queue strict <queue-id-0> [<queue-id-1> … <queue-id-7>]
<queue-id> - The range of traffic class is 0 to 7.
no - This command restores the default weighted scheduler mode for each specified queue on a
"per-port" basis.
i
The range of mapped traffic class is 0 to 6 for the stackable connection blade.
Default Setting
None
Command Mode
Interface Config.
This command activates the strict priority scheduler mode for each specified queue on a device.
Syntax
queue cos-queue strict all <queue-id-0> [<queue-id-1> … <queue-id-7>]
no queue cos-queue strict all <queue-id-0> [<queue-id-1> … <queue-id-7>]
<queue-id> - The range of traffic class is 0 to 7.
no - This command restores the default weighted scheduler mode for each specified queue on a
device.
i
The range of mapped traffic class is 0 to 6 for the stackable connection blade.
Default Setting
None
Command Mode
Global Config.