1. Upper buoyancy spring* ................................................6600-1464-500
2. Spool ........................................................................................6600-1317-500
3. Plastic washer .....................................................................6600-1708-500
4. Lock nut, M3 ........................................................................6600-0714-401
5. Lower buoyancy spring* ................................................6600-1465-500
6. Screw, M3 x 10 Button head .........................................6600-0706-401
7. Lock washer, M3 .................................................................6600-0713-402
8. Lift belt (Current revision is white.)** ........................6600-1372-500
9. Block adjuster, top .............................................................6600-1358-500
10. Belt block bottom ..............................................................6600-1359-500
11. Spring switch actuator ...................................................6600-1362-500
12. Screw, M3 x 20 button head .........................................6600-0706-404
13. Screw, M3 x 10 button head .........................................6600-0706-401
14. Split ring lock washer, M3 ..............................................6600-0713-402
15. Flat washer, M3...................................................................6600-0712-402
16. Belt tensioner spring ........................................................6600-1071-400
17. Belt block cover ..................................................................6600-1360-500
18. Screw, M3 x 10 at head socket .................................6600-1151-400
19. Belt adjuster, bottom........................................................6600-1357-500
20. Belt guide block ..................................................................6600-1815-500
21. Spacer .....................................................................................6600-1491-500
22. Belt switch assembly guide ..........................................6600-1769-500
Parts not shown:
Micro-switch (part of switch harness) ...............................Refer to wiring diag.
Switch hardware
Screw, M2 x 16 llister head ........................................6600-0710-408
Split ring lock washer, M2 ..............................................6600-0713-401
NutM2 .....................................................................................6600-0711-401
*Replace all the buoyancy springs at one time.
**When ordering the lift belt, also order a belt block cover, a bottom belt adjuster, and two M3 x 10 at head socket screws.
182 6600-0343-000 104 © 2001 by Datex-Ohmeda, Inc.. All rights reserved.
Chapter 6: Illustrated Parts
To Next Page
Loading...
