GE Giraffe OmniBed - Appendix B: Specifications; Power Requirements; Accessory Outlets; Standards

Appendix B: Specications
B.1 Power Requirements
• 10.5 A @100v ~, 50/60 Hz
• 9 A @115v ~, 50/60 Hz
• 4.5 A @ 220v ~, 50/60 Hz
• 4.5 A @ 230v ~, 50/60 Hz
• 4.5 A @ 240v ~, 50/60 Hz
Inrush for 1/2 cycle current < 80 A
Radiant Heater Element = 450-480 Watts
B.2 Accessory Outlets
• 2 A @100v ~, 50/60 Hz
• 2 A @115v ~, 50/60 Hz
• 1 A @ 220v ~, 50/60 Hz
• 1 A @ 230v ~, 50/60 Hz
• 1 A @ 240v ~, 50/60 Hz
B.3 Standards
Designed to meet requirements of
• IEC 60601-2-19 1990 with amendment 1 1996
• IEC 60601-2-21 1994 with amendment 1 1996
• IEC 60601-1 1998 with amendment 1 1991 and amendment 2 1995
• IEC 60601-1-2 2007
• 21 CFR CH-1, Section 1020.30 (N)
• UL 60601-1 2003
• CAN/CSA-C22.2 No. 601.1-M90 1990 with supplement 1 1994 and amendment 2 1998
• ISO 19054 2005 with an exception claim to clause 5.2.7.2. Slight deformation of rail occurs after application
of 500N to wide surface of DIN rail.
© 2001 by Datex-Ohmeda, Inc.. All rights reserved. 6600-0343-000 104 235