GE LOGIQ Totus

GE HealthCare CONFIDENTIAL
Direction 5936427, Rev. 1 LOGIQ Totus Basic Service Manual
Chapter 3 LOGIQ Totus Setup 3 - 51
3-7-4-5 Save As
Use Save As to save images to external media.
Table 3-18 To Configure Save As
Step Corresponding Graphic
1.
Navigate to Connectivity > Connection Manager > MyComputer
Device.
2.
Select +Add.
3.
Select Save As > Add.
4.
In Name, enter a logical name of the service.
5.
Under Destination, enter a destination device for the service.
6.
Select Done.