GE LOGIQ Totus

GE HealthCare CONFIDENTIAL
Direction 5936427, Rev. 1 LOGIQ Totus Basic Service Manual
3 - 52 Section 3-7 - Setting Up Connectivity and Tips
3-7-4-6 USB Quick Save
Use USB Quick Save to save images or video clips to a USB flash drive with a print button. The images
are stored in either .jpg or .wmv formats.
Table 3-19 To Configure USB Quick Save
Step Corresponding Graphic
1.
Navigate to Connectivity > Connection Manager > MyComputer
Device.
2.
Select +Add.
3.
Select USB Quick Save > Add.
4.
In Name, enter a logical name of the service.
5.
Under Destination, enter a destination device for the service.
6.
Select Done.