GE LOGIQ Totus

GE HealthCare CONFIDENTIAL
Direction 5936427, Rev. 1 LOGIQ Totus Basic Service Manual
Chapter 3 LOGIQ Totus Setup 3 - 53
3-7-4-7 Standard Printer
Use Standard Printer to add an onboard printer in the Ultrasound system.
Table 3-20 To Configure Standard Printer
Step Corresponding Graphic
1.
Navigate to Connectivity > Connection Manager > MyComputer
Device.
2.
Select +Add.
3.
Select Standard Print > Add.
4.
In Name, enter a logical name of the service.
5.
In Printer, select the printer for this service.
6.
In the remaining fields, select the printer preferences.
7.
Select Done.