GE LOGIQ Totus

GE HealthCare CONFIDENTIAL
Direction 5936427, Rev. 1 LOGIQ Totus Basic Service Manual
3 - 60 Section 3-7 - Setting Up Connectivity and Tips
12.
Select Verify Connection.
NOTE: This action checks the connection status with the server and
the compatibility of the service configuration.
This is an example of a successful compatibility test. If the test is
unsuccessful, Connection and/or Compatibility will be red and text will
display indicating the issues.
13.
Repeat these steps as needed to configure all of the services for the configured devices.
Table 3-25 To Configure a Dicom Service (Continued)
Step Corresponding Graphic