GE LOGIQ Totus

GE HealthCare CONFIDENTIAL
Direction 5936427, Rev. 1 LOGIQ Totus Basic Service Manual
Chapter 3 LOGIQ Totus Setup 3 - 71
3-7-6-7 Vscan Air
Use Vscan Air to pair the Vscan Air CL probe with the Ultrasound system. The Vscan Air CL probe is a
battery-operated, wireless, general-purpose diagnostic handheld ultrasound imaging system.
NOTE: The Vscan Air option key needs to be installed to enable the Vscan Air page.
Table 3-33 To Configure Vscan Air
Step Corresponding Graphic
1.
Navigate to Connectivity > Connection Manager > Special Devices.
2.
Select Vscan Air.
3.
Configure the fields on the page.
4.
Select Done.