GE LOGIQ Totus

GE HealthCare CONFIDENTIAL
DIRECTION 5936427, REV. 1 LOGIQ TOTUS Basic Service Manual
8 - 14 Section 8-4 - Loading / Reloading / Upgrading the Software
2.
View these screens as the application software loads.
This will take approximately 15-20 minutes.
3.
When System Imaging is Complete displays, do the
following:
• Select OK to reboot the system.
• Remove the USB media BEFORE the system starts
rebooting.
Table 8-6 Load Base Image and Application Software- full load(Continued)
Step Corresponding Graphic