GE LOGIQworks - Initialize Service Platform for Logiqworks 3.0; Filling out and Sending the Product Locator Card

GE MEDICAL SYSTEMS
D
IRECTION 5184024-100, REVISION 5 LOGIQWORKS® BASIC SERVICE MANUAL
Chapter 3 Installation 3-67
3-4-7 Initialize Service Platform for LOGIQworks 3.0
For Installation Inside II see Technical Publication, Installation Manual: InSite II ViewPoint/LOGIQworks
(Direction 5181936-100).
3-4-8 Filling out and sending the Product Locator Card
To finish the installation procedure the product locator card has to be filled out and send to the given
address.
Figure 3-53 Product Locator Card