GE MEDICAL SYSTEMS
D
IRECTION 5184024-100, REVISION 5 LOGIQWORKS® BASIC SERVICE MANUAL
Chapter 1 Introduction 1-7
Section 1-3
Safety Considerations
1-3-1 Safety Hints
If hardware from different manufacturers as ViewPoint is used Safety Notes are in their responsibility.
So also see in the relevant manuals.
"OFF/Standby" Indicates the power off/
standby position of the power switch.
CAUTION
This Power Switch DOES NOT ISOLATE
Mains Supply
ON/OFF switches
"Mains ON" Indicates the power on position of
the mains power switch.
"Protective Earth" Indicates the protective
earth (grounding) terminal.
"Equipotentiality" Indicates the terminal to be
used for connecting equipotential conductors
when interconnecting (grounding) with other
equipment.
“Nonionizing Radiation” indicates that the
system applies RF energy.
Rear of printer near power inlet
WARNING
WARNING
For hardware related risks please pay attention to the safety instructions of the DELL hardware
manuals (e.g. System Information Guide).
Table 1-8 Product Icons (Continued)
LABEL/SYMBOL PURPOSE/MEANING LOCATION
To Next Page
Loading...
