GE MEDICAL SYSTEMS
DIRECTION 5184024-100, REVISION 5 LOGIQWORKS BASIC SERVICE MANUAL
2-8 Section 2-2 - General Console Requirements
2-2-4-4 Site Power Outlets (cont’d)
2-2-4-5 Unit Power Plug
If the unit arrives without a power plug, or with the wrong plug, you must contact GE Service; they must
supply what is locally required.
WARNING
WARNING
POWER OUTAGE MAY OCCUR.
The LOGIQworks requires a dedicated single branch circuit. To avoid circuit overload and
possible loss of critical care equipment, make sure you DO NOT have any other equipment
operating on the same circuit.
To Next Page
Loading...
