GE MEDICAL SYSTEMS
D
IRECTION 5184024-100, REVISION 5 LOGIQWORKS® BASIC SERVICE MANUAL
Chapter 1 Introduction 1-1
Chapter 1
Introduction
Section 1-1
Overview
1-1-1 Purpose of Chapter 1
This chapter describes important issues related to safely servicing the LOGIQworks.
The service provider must read and understand all the information presented in this manual before
installing or servicing a unit.
1-1-2 Purpose of Service Manual
This Service Manual provides installation and service information for the LOGIQworks and contains the
following chapters:
1.) Chapter 1 - Introduction: Contains a content summary and warnings.
2.) Chapter 2 - Pre-Installation: Contains any pre-installation requirements for the LOGIQworks.
3.) Chapter 3 - Installation: Contains the LOGIQworks installation procedure with installation
checklist.
4.) Chapter 4 - Functional Checks: Contains functional checks that must be performed as part of the
installation, or as required during servicing and periodic maintenance.
5.) Chapter 5 - Components and Functions (Theory): Contains block diagrams and functional
explanations of the LOGIQworks electronics.
6.) Chapter 6 - Service Adjustments: Contains instructions on how to make available adjustments to
the LOGIQworks.
7.) Chapter 7 - Diagnostics/Troubleshooting: Provides procedures for running diagnostic or related
routines for the LOGIQworks.
8.) Chapter 8 - Replacement Procedures: Provides disassembly procedures and reassembly
procedures for all changeable Field Replaceable Units (FRU).
9.) Chapter 9 - Renewal Parts: Contains a complete list of replacement parts for the LOGIQworks.
10.)Chapter 10 - Quality Assurance: Provides periodic maintenance procedures for the LOGIQworks.
Table 1-1 Contents in Chapter 1
Section Description Page Number
1-1
Overview
1-1
1-2
Important Conventions
1-4
1-3
Safety Considerations
1-7
1-4
Customer Assistance
1-19
To Next Page
Loading...
