GE MEDICAL SYSTEMS
DIRECTION 5184024-100, REVISION 5 LOGIQWORKS BASIC SERVICE MANUAL
3-182 Section 3-5 - Configuration
3-5-9-5 Viewing Buttons
To select the layout types to be previewed on the Print tool tab:
1.) Select Configuration > Print Service... from the Data Selector menu.
2.) Select the Viewing Buttons tab from the Print Service Properties page.
• Button Preview: A preview of the buttons that will appear on the Print tool tab in the Viewing
Section.
• Medium Type for Preview: Select a medium size from the drop-down list of common sizes.
LOGIQworks will use this size when creating the previews.
• Click on the Change... button to change the selection of layouts to be shown on the Print tool tab
in the Viewing Section.
Figure 3-155 Print Layout Types
To Next Page
Loading...
