GE LOGIQworks - Page 253

GE MEDICAL SYSTEMS
D
IRECTION 5184024-100, REVISION 5 LOGIQWORKS® BASIC SERVICE MANUAL
Chapter 3 Installation 3-187
3-5-10-2 Setting up and configuring destinations (cont’d)
3.) Enter the name of the new destination. The name will be displayed in the list box on the
Teleradiology Tool tab. The name field must be unique. The system will check this when you enter
the name.
4.) Enter the host name (DNS name or IP address) of the new destination.
5.) Optionally, you can enter a description.
6.) For more detail on the options and IODs to select, please refer to the RadWorks 6.1 Installation
Guide, page 57 for LOGIQworks up to Version 1.3 or Radworks 7.0 Installation Guide for
LOGIQworks Version 2.0 or 3.0.
7.) Click Next.
Figure 3-160 Teleradiology Destination - Add Destination
3.
5.
4.