Windshield/bodywork glass/wing mirror--Front windscreen
î 323 î
time.
(h) Use brush or sponge to daub G priming paint on the front
windscreen brim and contacting interface.
(i) When daub other areas beside regulations, use clean duster
cloth to clean before priming paint gets dry.
Notes:
z Use G priming paint over three minutes.
z Opened G priming paint can not use for the next
time.
(j) Cut a hole on glue canister sharp mouth
(k) Put the glue canister in the sealed glue jet gun.
(l) Daub agglutinant on the front windscreen.
A: 12mm
B: 8mm
18.Assemble front windscreen sealed trim tape
[68000062]
Assemble the new trim tape in the bodywork manually.
19. Inspect water leakage and repair
(a) Actualize water leakage after hardening.
(b) Use agglutinant to seal leak position.
To Next Page
Loading...
