SC201(1900A/1903A) Safety Matters for Attention
At working, don’t touch or lean anything on the moving components,
because both of the above behaviors will cause the personal injury or the
damage of the sewing machine.
During working, if the mis-operation happens or the abnormal noise or
smell is found at the sewing machine, user shall cut off the power at once,
and then contact the trained technicians or the supplier of that machine for
solution.
For any trouble, please contact the trained technicians or the supplier of
that machine.
Only can the trained technicians perform the repair, maintenance and
inspection of this sewing machine.
For the repair, maintenance and inspection of the electrical component,
please contact the professionals at the manufacturer of control system in
time.
At following circumstances, please cut off the power and pull off the plug at
once so as to avoid the personal injury caused by the mis-operation of start
switch:.
1.Repair, adjustment and inspection;
2.Replacement of the component like curve needle, knife and so on
Before the inspection, adjustment or repair of any gas-driven devices, user
shall cut off the gas supply till the pressure indicator falls to 0.
When adjusting the devices needing the power supply and gas supply,
users can’ t be too careful to follow the entire Safety Matters for Attention.
If the sewing machine damages due to the unauthorized modification, our
company will not be responsible for it.
To Next Page
Loading...
