Grandstream Networks UCM6200 - Page 260

P a g e | 259
UCM6200 Series User Manual
Disconnect
 Default code: *0.
 Enter the code during active call. It will disconnect the call.
 Options
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
Call Park
 Default code: #72.
 Enter the code during active call to park the call.
 Options
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
Audio Mix Record
 Default code: *3.
 Enter the code followed by # or SEND to start recording the audio call
and the UCM6200 will mix the streams natively on the fly as the call is in
progress.
 Options
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
DND/Call Forward
Do Not Disturb (DND)
Activate
 Default code: *77.
Do Not Disturb (DND)
Deactivate
 Default code: *78.
Call Forward Busy
Activate
 Default Code: *90.
 Enter the code and follow the voice prompt. Or enter the code followed
by the extension to forward the call.
Call Forward Busy
Deactivate
 Default Code: *91.
Call Forward No Answer
Activate
 Default Code: *92.
 Enter the code and follow the voice prompt. Or enter the code followed
by the extension to forward the call.