Grandstream Networks UCM6200 User Manual

P a g e | 260
UCM6200 Series User Manual
Call Forward No Answer
Deactivate
 Default Code: *93.
Call Forward
Unconditional Activate
 Default Code: *72.
 Enter the code and follow the voice prompt. Or enter the code followed
by the extension to forward the call.
Call Forward
Unconditional
Deactivate
 Default Code: *73.
Feature Misc
Feature Code Digits
Timeout
 Default Setting: 1000.
 Configure the maximum interval (in milliseconds) between the digits input
to activate the feature code.
Call Park
 Default Extension: 700.
 During an active call, initiate blind transfer and then enter this code to
park the call.
Parked Lots
 Default Extension: 701-720.
 These are the extensions where the calls will be parked, i.e., parking lots
that the parked calls can be retrieved.
Use Parklot as
Extension
 If checked, the parking lot number can be used as extension. The user
can transfer the call to the parking lot number to park the call. Please
note this parking lot number range might conflict with extension range.
Parking Timeout (s)
 Default setting: 300.
 This is the timeout allowed for a call to be parked. After the timeout, if the
call is not picked up, the extension who parks the call will be called back.
Feature Codes
Voicemail Access Code
 Default Code: *98.
 Enter *98 and follow the voice prompt. Or dial *98 followed by the
extension and # to access the entered extension's voicemail box.
My Voicemail
 Default Code: *97.
 Press *97 to access the voicemail box.
Agent Pause
 Default Code: *83.
 Pause the agent in all call queues.

Grandstream Networks UCM6200 Specifications

General

Brand	Grandstream Networks
Model	UCM6200
Category	IP Phone
Language	English