GW Instek GDS-2000E Series - Bus Encoding

CONFIGURATION
133
5. From the side menu choose the
LIN input and the polarity of the
bus.
LIN Input
CH1 ~ CH4
Polarity
Normal (High = 1),
Inverted(High = 0)
Note
The Sample Point soft-key indicates the sampling
position of each bit. This parameter is fixed.
Configuration
The Configure menu sets the bit rate, the LIN
standard and the parity options for the Id frame.
6. Press Configure from the bottom
menu.
7. From the side menu select configuration items.
Bit Rate
1.2kbps, 2.4kbps, 4.8kbps,
9.6kbps, 10.417kbps, 19.2kbps
LIN Standard
V1.x, V2.x, Both
Include Parity
Bits with Id
On, Off
Bus Encoding
Background
The bus that is displayed on the screen or in the
event tables can be set to either hex or binary
formats.
Operation
Press Bus Display from the Bus
menu and choose either Hex or
Binary from the side menu.