GDS-2000E Series User Manual
92
Navigate Segmented Memory
After the segmented memory acquisitions have
been captured you can navigate through each
segment one at a time.
1. Press Select Segments from the
bottom menu. This key will be
available in the Stop mode.
2. To navigate to the segment of
interest, press Current Seg from the
side menu and use the Variable
knob to scroll to the segment of
interest.
Alternatively, the Set to Minimum
and Set to Maximum keys can be
used to jump to the first and last
segment respectively.
3. The position in time of the selected
segment relative to the time of the
first segment is shown in the
Segments Time key.
Play Through Each Segment
When all the segments have been acquired, the
play/pause key can be used to play back through
each segment.
1. Make sure the scope is in Segments Stop mode.
See page 90 for details.
To Next Page
Loading...
