GW Instek GDS-2000E Series - Set Date and Time

GDS-2000E Series User Manual
188
2. Press System from the lower menu.
3. Press Erase Memory from the side
menu.
A message will prompt you to press Erase
Memory again to confirm the process. Pressing
any other key will cancel erasing the memory.
4. Press Erase Memory again.
Set Date and Time
Panel Operation/
Parameter
1. Press the Utility key.
Utility
2. Press Date & Time on the lower
menu.
3. Set the Year, Month, Day, Hour and Minute from
the side menu.
Year
2000 ~ 2037
Month
1 ~ 12
Day
1 ~ 31
Hour
1~23
Minute
0~59
4. Press Save Now from the side menu
to save the date and time.