GW Instek GDS-2000E Series User Manual

CONFIGURATION
181
Clear All Marks
To clear all the saved marks, press
Clear All Marks from the side
menu.
Note
Each time the Save All Marks function is used, the
previously saved marks will also be retained,
unless cleared.
Setting/Clearing Single Search Events
Background
In addition to searching for search events based on
Search Type settings, custom search marks can be
created with the Set/Clear key.
Set Search Event
1. Navigate to a point of interest using
the horizontal position knob or
some other method.
POSITION
PUSH TO
ZERO
2. Press the Set/Clear key.
Set/Clear
3. A marker will be saved at the center
of the display.
 This marker can be navigated
to/from in the same way that a
normally saved search marker
can.
Clear Search Event
To clear a set search event, use the
search arrows to navigate to the
event of interest and press the
Set/Clear key.
The marker will be deleted from the
display.
Set/Clear

GW Instek GDS-2000E Series Specifications

General

Brand	GW Instek
Model	GDS-2000E Series
Category	Test Equipment
Language	English