GDS-2000E Series User Manual
156
7. To set the delay press Delay from
the bottom bezel.
8. To Delay by Time (Duration), press
Time from the side menu and set
the delay time.
4ns ~ 10s (by time)
Set to minimum
9. To Delay by Event, press Event
from the side menu and set the
number of events.
Using Pulse Width Trigger
1. Press the trigger Menu key.
2. Press the Type key from the lower
bezel menu.
3. Select Pulse Width from the side
menu. The pulse width trigger
indicator appears at the bottom of
the display.
From left: source, polarity, when, coupling
4. Press Source from the lower bezel.
To Next Page
Loading...
