GW Instek GDS-2000E Series User Manual

GDS-2000E Series User Manual
192
Applications
Overview
Background
The APP function allows different software
applications to be run. The GDS-2000E comes pre-
installed with a number of apps, as described
below. Please see your local GW Instek distributor
for the latest information on new apps.
Included
Applications
Go/No-Go
The Go/No-Go application can be
used to set threshold boundaries
for input signals. Go/No-Go tests
to see if a waveform will fit inside
a user-specified maximum and
minimum amplitude boundary
(template).
DVM
The DVM application displays a
digital voltage meter readout that
floats on the top left-hand side of
the screen.
Data Log
The Data Log app will log
waveform data and/or
screenshots at set intervals for set
duration of time.
Digital Filter
Adds a digital low or high filter to
any of the input channels. Each
filter can have a user-defined
cutoff frequency set.
Mount Remote
Disk
This app allows the scope to
mount a network share drive.

GW Instek GDS-2000E Series Specifications

General

Brand	GW Instek
Model	GDS-2000E Series
Category	Test Equipment
Language	English