GW Instek GDS-2000E Series User Manual

GDS-2000E Series User Manual
276
Pre-trigger
10 div maximum
Post-trigger
2,000,000 div maximum.
Timebase
Accuracy
±50 ppm over any ≥ 1 ms time interval
Real Time
Sample Rate
1GSa/s max. (4ch models);
1GSa/s per channel (2ch models)
Record Length
Max. 10Mpts
Acquisition
Mode
Normal, Average, Peak Detect, Single
Peak Detection
2nS (typical)
Average
selectable from 2 to 256
X-Y Mode
X-Axis Input
Channel 1; Channel 3*
*four channel models only
Y-Axis Input
Channel 2; Channel 4*
*four channel models only
Phase Shift
±3° at 100kHz
Cursors and
Measurement
Cursors
Amplitude, Time, Gating available;
Unit:Seconds(s), Hz(1/s), Phase(degree),
Ration(%).
Automatic
Measurement
36 sets: Pk-Pk, Max, Min, Amplitude, High, Low,
Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle
Area, ROVShoot, FOVShoot, RPREShoot,
FPREShoot, Frequency, Period, RiseTime, FallTime,
+Width, -Width, Duty Cycle, +Pulses, -Pulses,
+Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF,
LFR, LFF, Phase.
Cursors
measurement
Voltage difference between cursors ( ∆V) Time
difference between cursors ( ∆T)
Auto counter
6 digits, range from 2Hz minimum to the rated
bandwidth
Control Panel
Function
Autoset
Single-button, automatic setup of all channels for
vertical, horizontal and trigger systems, with undo
Autoset
Save Setup
20set
Save Waveform
24set
Display
TFT LCD Type
8" TFT LCD WVGA color display
Display
Resolution
800 horizontal × 480 vertical pixels (WVGA)
Interpolation
Sin(x)/x
Waveform
Display
Dots, vectors, variable persistence (16ms~4s),
infinite persistence
Waveform
Update Rate
120,000 waveforms per second, maximum
Display
Graticule
8 x 10 divisions

GW Instek GDS-2000E Series Specifications

General

Brand	GW Instek
Model	GDS-2000E Series
Category	Test Equipment
Language	English