GW Instek GDS-2000E Series User Manual

MEASUREMENT
41
Change modes
1. Choose between Fit Screen Mode
and AC Priority Mode from the
bottom menu.
2. Press the Autoset key again to use
Autoset in the new mode.
Autoset
Fit Screen Mode
AC Priority
Limitation
Autoset does not work in the following situations:
 Input signal frequency is less than 20Hz
 Input signal amplitude is less than 10mV
Note
The Autoset key does NOT automatically activate the
channels to which input signals are connected.

GW Instek GDS-2000E Series Specifications

General

Brand	GW Instek
Model	GDS-2000E Series
Category	Test Equipment
Language	English